installed the sway bar - perfect !!!

Questions about the Ryker Brakes or Suspension? This is the place@
Post Reply
Message
 
chris56
Posts: 14
Joined: Sat Oct 13, 2018 8:26 am
Has thanked: 1 time
Been thanked: 6 times

installed the sway bar - perfect !!!

#1 Post by chris56 » Thu Mar 21, 2019 10:56 am

look how quiet the front is now - also on higher speed 80mls/h ..

"Thumbs Up" from:
Zoot

User avatar
Zoot
Posts: 31
Joined: Sun Mar 03, 2019 6:14 pm
Has thanked: 45 times
Been thanked: 7 times

Re: installed the sway bar - perfect !!!

#2 Post by Zoot » Thu Mar 21, 2019 6:00 pm

How much work was it to install the sway bar - how much disassembly did it involve?
Is the ride rougher over bad pavement?

Also, tell us about that windscreen, it does not appear to be the OEM screen nor the CalSci piece...

Thanks

rilawrence
Posts: 35
Joined: Thu Apr 18, 2019 1:27 pm
Location: North Florida
Has thanked: 13 times
Been thanked: 8 times

Re: installed the sway bar - perfect !!!

#3 Post by rilawrence » Mon Apr 22, 2019 11:02 am

chris56 wrote:
Thu Mar 21, 2019 10:56 am
look how quiet the front is now - also on higher speed 80mls/h ..
Did you install aluminum sway bar end links? Here's the link: https://www.slingmods.com/canam-ryker-b ... ?vehicle=4.

Should the sway bar and sway bar end links be installed together to get the most benefit?

User avatar
mikey
Posts: 87
Joined: Wed Feb 06, 2019 8:16 am
Has thanked: 63 times
Been thanked: 25 times

Re: installed the sway bar - perfect !!!

#4 Post by mikey » Tue Apr 23, 2019 6:46 am

rilawrence wrote:
Mon Apr 22, 2019 11:02 am
Did you install aluminum sway bar end links? Here's the link: https://www.slingmods.com/canam-ryker-b ... ?vehicle=4.

Should the sway bar and sway bar end links be installed together to get the most benefit?
I think if I were going to upgrade the sway bar, I'd upgrade the plastic bits for those things too.

AZRIDER
Posts: 5
Joined: Sun May 05, 2019 4:45 pm
Has thanked: 1 time
Been thanked: 1 time

Re: installed the sway bar - perfect !!!

#5 Post by AZRIDER » Thu Jun 13, 2019 6:35 pm

Got the Wife's installed today. WOW what a chore!! Didn't help it was about 90 degrees in the garage. The directions are vague at best, I didn't remove the side skirts and I didn't remove the left lower suspension arm. It is a great improvement at highway speed 80 mph no problem!! Still seams a little twitchy at high speed though??

User avatar
Chris2087
Posts: 15
Joined: Tue Apr 16, 2019 7:42 am
Has thanked: 7 times
Been thanked: 4 times

Re: installed the sway bar - perfect !!!

#6 Post by Chris2087 » Fri Jun 14, 2019 2:11 pm

Twitchy feeling in steering is more than likely a toe in setting.
900 Rally -Utah

AZRIDER
Posts: 5
Joined: Sun May 05, 2019 4:45 pm
Has thanked: 1 time
Been thanked: 1 time

Re: installed the sway bar - perfect !!!

#7 Post by AZRIDER » Fri Jun 14, 2019 5:47 pm

Chris2087 wrote:
Fri Jun 14, 2019 2:11 pm
Twitchy feeling in steering is more than likely a toe in setting.
Gonna check that out next,I need to get a shop manual though.

KC61
Posts: 95
Joined: Wed Apr 03, 2019 9:40 am
Has thanked: 0
Been thanked: 26 times

Re: installed the sway bar - perfect !!!

#8 Post by KC61 » Sun Jun 23, 2019 10:51 am

Any advice or direction on the Can Am Sway bar installation? Picked mine up yesterday.

Post Reply