Rear fender on a 900 Rally

General discussion area on the Can-Am Ryker
Post Reply
Message
 
Franzmann
Posts: 1
Joined: Fri Jun 14, 2019 1:49 pm
Has thanked: 0
Been thanked: 0

Rear fender on a 900 Rally

#1 Post by Franzmann » Sun Jun 16, 2019 10:17 am

Hello everyone,
I just got a 900 Rally and would like to put a whole rear fender from the regular 900 on, because it would keep the shock and everything else under the seat much cleaner.
The problem is that the regular 900 rear fender is not wide enough to accommodate the wider tires on the Rally and consequently the tire will drag on the fender.
Does anyone know of any after market solution to this issue?
Ideas would be greatly appreciated.

Thanks very much
Franz

User avatar
cattleshow
Posts: 62
Joined: Sat Jan 05, 2019 8:33 am
Location: Central Texas
Has thanked: 37 times
Been thanked: 17 times

Re: Rear fender on a 900 Rally

#2 Post by cattleshow » Mon Jun 17, 2019 4:59 am

I,m sure an aftermarket company will solve this problem. Dumb idea not to put a fender on rear. Or at least a cover over the shock.

ppuskas
Posts: 3
Joined: Mon May 18, 2020 8:15 pm
Has thanked: 0
Been thanked: 2 times

Re: Rear fender on a 900 Rally

#3 Post by ppuskas » Thu May 28, 2020 6:11 pm

Wider? you mean taller? either way it fits on my wife's ryker, and it fits on this guys ryker as well (see youtube link). No need for aftermarket, just a fender and some rivets.

"Thumbs Up" from:
Decon Blue

tapaloo
Posts: 7
Joined: Sun Oct 06, 2019 9:28 pm
Has thanked: 0
Been thanked: 0

Re: Rear fender on a 900 Rally

#4 Post by tapaloo » Fri May 29, 2020 9:41 am

I replaced mine with no issues. Easy job just need to wiggle and play around with tire when installing it back on.

Shadowhawk
Posts: 1
Joined: Sun May 03, 2020 2:41 pm
Has thanked: 0
Been thanked: 0

Re: Rear fender on a 900 Rally

#5 Post by Shadowhawk » Thu Jul 02, 2020 6:50 pm

Does the rear tire have to be removed to change the fender?

tapaloo
Posts: 7
Joined: Sun Oct 06, 2019 9:28 pm
Has thanked: 0
Been thanked: 0

Re: Rear fender on a 900 Rally

#6 Post by tapaloo » Sat Jul 04, 2020 8:11 am

Yes, you need to remove front small plastic fender by popping out two rivets and screw then replace it with full fender. New full fender should come with 2 each rivets and screw. Hope this help. Will try to attach diagram. Good luck!

Post Reply