Can-Am Ryker Forums

look how quiet the front is now - also on higher speed 80mls/h ..

How much work was it to install the sway bar - how much disassembly did it involve?
Is the ride rougher over bad pavement?

Also, tell us about that windscreen, it does not appear to be the OEM screen nor the CalSci piece...

Thanks

chris56 wrote: ↑

Thu Mar 21, 2019 10:56 am

look how quiet the front is now - also on higher speed 80mls/h ..

Did you install aluminum sway bar end links? Here's the link: https://www.slingmods.com/canam-ryker-b ... ?vehicle=4.

Should the sway bar and sway bar end links be installed together to get the most benefit?

rilawrence wrote: ↑

Mon Apr 22, 2019 11:02 am

Did you install aluminum sway bar end links? Here's the link: https://www.slingmods.com/canam-ryker-b ... ?vehicle=4.

Should the sway bar and sway bar end links be installed together to get the most benefit?

I think if I were going to upgrade the sway bar, I'd upgrade the plastic bits for those things too.

Got the Wife's installed today. WOW what a chore!! Didn't help it was about 90 degrees in the garage. The directions are vague at best, I didn't remove the side skirts and I didn't remove the left lower suspension arm. It is a great improvement at highway speed 80 mph no problem!! Still seams a little twitchy at high speed though??

Twitchy feeling in steering is more than likely a toe in setting.

Chris2087 wrote: ↑

Fri Jun 14, 2019 2:11 pm

Twitchy feeling in steering is more than likely a toe in setting.

Gonna check that out next,I need to get a shop manual though.

Any advice or direction on the Can Am Sway bar installation? Picked mine up yesterday.