Gas fill cover

General discussion area on the Can-Am Ryker
Post Reply
Message
 
vmax3740
Posts: 35
Joined: Fri Mar 01, 2019 6:39 pm
Location: Michigan
Has thanked: 21 times
Been thanked: 26 times

Gas fill cover

#1 Post by vmax3740 » Wed Apr 17, 2019 6:54 pm

I live on a gravel and sand road , and anyone that does knows it gets everywhere. Sooner or later it will be in the tank.

I cut a piece out of an old thin mouse pad I had laying around, about 3x4 or so . I put a strip of two sided tape across the top, seals it right off. It just rolls up to put gas in.


Be safe and have fun
vmax3740
"Thumbs Up" from:
mikey
Top
KC61
Posts: 95
Joined: Wed Apr 03, 2019 9:40 am
Has thanked: 0
Been thanked: 26 times

Re: Gas fill cover

#2 Post by KC61 » Wed Apr 17, 2019 7:38 pm

That's a great idea. I would have preferred they just did a simple gas cap
Top
User avatar
mikey
Posts: 87
Joined: Wed Feb 06, 2019 8:16 am
Has thanked: 63 times
Been thanked: 25 times

Re: Gas fill cover

#3 Post by mikey » Thu Apr 18, 2019 6:21 am

I put a wing nut on a lid from a jar of peanuts.

Such a weird design, in my opinion.
Top
User avatar
Aufgeblssen47
Posts: 189
Joined: Thu Apr 25, 2019 11:08 am
Has thanked: 0
Been thanked: 27 times

Re: Gas fill cover

#4 Post by Aufgeblssen47 » Fri Apr 26, 2019 3:21 pm

mikey wrote: ↑
Thu Apr 18, 2019 6:21 am
 I put a wing nut on a lid from a jar of peanuts.

Such a weird design, in my opinion.
This is the way of the future apparently. Our new RV with Ford Transit chassis has a very similar thing; just a plastic flap that swings out to access the capless filler tube.

BTW: What does the wing nut attach to?
Top
User avatar
slingmods
Posts: 134
Joined: Sat Sep 22, 2018 10:42 am
Location: California
Has thanked: 86 times
Been thanked: 50 times
Contact:
Contact slingmods

Re: Gas fill cover

#5 Post by slingmods » Fri Apr 26, 2019 8:49 pm

We completely agree... especially on the Rally model. Although the "capless" system is convenient for re-fueling it allows dirt and dust to build up in your fill zone. You don't want that stuff in your tank. We''ll have an aluminum "dust cap" here shortly, that features a center vent. I've attached an image for your perusal. It will of course be finished off with a black anodized finish to look pretty. We'll be doing a giveaway on the forum for a few free caps when they come out!
Attachments
MVIMG_20190424_131650.jpg
MVIMG_20190424_131650.jpg (197.1 KiB) Viewed 6767 times
"Thumbs Up" from:
Chris2087 • vmax3740 • rilawrence • Ryk600 • mugwomp • mikey • PaulP
Our Collection:
Rykers: 2019 Ryker 600 | 2019 Ryker 900 Rally
Spyders: 2017 F3-S | 2018 RT Limited | 2019 F3 Limited | 2020 RT
Slingshots: 2015 Base | 2015 SL | 2016.5 SLE | 2018 SLR | 2020 R
Top
vmax3740
Posts: 35
Joined: Fri Mar 01, 2019 6:39 pm
Location: Michigan
Has thanked: 21 times
Been thanked: 26 times

Re: Gas fill cover

#6 Post by vmax3740 » Sat Apr 27, 2019 7:09 am

Nice job !

How about a Socket for the wheel nut ???
Top
User avatar
slingmods
Posts: 134
Joined: Sat Sep 22, 2018 10:42 am
Location: California
Has thanked: 86 times
Been thanked: 50 times
Contact:
Contact slingmods

Re: Gas fill cover

#7 Post by slingmods » Sat Apr 27, 2019 7:37 am

vmax3740 wrote: ↑
Sat Apr 27, 2019 7:09 am
 Nice job !

How about a Socket for the wheel nut ???
Sure.. we can look into that!
Our Collection:
Rykers: 2019 Ryker 600 | 2019 Ryker 900 Rally
Spyders: 2017 F3-S | 2018 RT Limited | 2019 F3 Limited | 2020 RT
Slingshots: 2015 Base | 2015 SL | 2016.5 SLE | 2018 SLR | 2020 R
Top
User avatar
Aufgeblssen47
Posts: 189
Joined: Thu Apr 25, 2019 11:08 am
Has thanked: 0
Been thanked: 27 times

Re: Gas fill cover

#8 Post by Aufgeblssen47 » Sun Apr 28, 2019 4:44 pm

I found a cover from a beer keg top fits perfectly! I have a beer kegerator.

Image
Top
rilawrence
Posts: 35
Joined: Thu Apr 18, 2019 1:27 pm
Location: North Florida
Has thanked: 13 times
Been thanked: 8 times

Re: Gas fill cover

#9 Post by rilawrence » Mon Apr 29, 2019 8:06 am

slingmods wrote: ↑
Fri Apr 26, 2019 8:49 pm
 We''ll have an aluminum "dust cap" here shortly, that features a center vent.
Is it self-venting?

+1 on the socket.
Top
User avatar
Aufgeblssen47
Posts: 189
Joined: Thu Apr 25, 2019 11:08 am
Has thanked: 0
Been thanked: 27 times

Re: Gas fill cover

#10 Post by Aufgeblssen47 » Tue Apr 30, 2019 4:59 am

Aufgeblssen47 wrote: ↑
Sun Apr 28, 2019 4:44 pm
 I found a cover from a beer keg top fits perfectly! I have a beer kegerator.

Image
Update!!! My plastic cap failed. Apparently the wind seen in that area is enough to lift it out of place. I only went 50 MPH max. on a short trip, and it had been blown away. NOW I have a chromed metal cap (also from my kegerator), that fits great! I added a little handle in the middle made out of foam double stick tape that works well. I doubt wind will be able to lift metal!
Top
Post Reply

Return to “Can-Am Ryker General Discussion”