New to the Ryker forum? Feel free to introduce yourself here!

New to the Ryker? New to forums? Introduce yourself and say hello! Ask questions and we can help you get going.
Message
 
Rykerrider39
Posts: 39
Joined: Tue Sep 10, 2019 6:49 pm
Has thanked: 0
Been thanked: 10 times

Re: New to the Ryker forum? Feel free to introduce yourself here!

#121 Post by Rykerrider39 » Mon Oct 07, 2019 2:33 am

Welcome to the family of rykers!

jamie129598
Posts: 10
Joined: Sun Oct 13, 2019 7:18 am
Has thanked: 0
Been thanked: 0

Re: New to the Ryker forum? Feel free to introduce yourself here!

#122 Post by jamie129598 » Sun Oct 13, 2019 10:00 am

hello every body i am Jamie i got a 900 ace in may this year went threw the recall already when sierra cycles sierra vista arizona called me about the recall i ordered a better sway bar for my bike to stop it from wandering all over the road and i bought a tool to adjust the rear shock to make it stiffer and put more weight on the front tires to stabilize it that did help a little bit so i checked the front tires and the factory or sierra cycles put a rally sport tire on the right front which took 45 psi instead of 32 psi so told B R P that they blamed them for that mistake B R P sent me a 200 dollar credit to use at sierra cycles so yesterday got the correct tire put on my bike for free so they claimed probably under my warranty !!!!!!!!! and the did a software update on my bike runs better so far time will tell the factory should use better tire anyway Kendas are not the best kind at all they should use Michelin tires i know that for sure been riding since i was 8 years old in 1976 !!!!!!!!!!!!!!

Rykerrider39
Posts: 39
Joined: Tue Sep 10, 2019 6:49 pm
Has thanked: 0
Been thanked: 10 times

Re: New to the Ryker forum? Feel free to introduce yourself here!

#123 Post by Rykerrider39 » Sun Oct 13, 2019 10:05 am

Welcome!
I got my ryker 900 ace back in September and I haven’t received a call from the dealer about any recall.May I ask what was recall about.

jamie129598
Posts: 10
Joined: Sun Oct 13, 2019 7:18 am
Has thanked: 0
Been thanked: 0

Re: New to the Ryker forum? Feel free to introduce yourself here!

#124 Post by jamie129598 » Sun Oct 13, 2019 5:11 pm

hello all i am Jamie so to look up for a recall on your bike you can do that yourself on the internet just look up can am ryker recalls enter your model number and V I N mine was a bad diaphragm and replaced a washer and a nut that was it when you can go to where you got your bike ask them they can also look it up for you and my bike sure runs alot better after the software update they did on my bike really made a improvement on how my bike runs now

Rykerrider39
Posts: 39
Joined: Tue Sep 10, 2019 6:49 pm
Has thanked: 0
Been thanked: 10 times

Re: New to the Ryker forum? Feel free to introduce yourself here!

#125 Post by Rykerrider39 » Sun Oct 13, 2019 5:15 pm

Thank very much for that information Jamie I really appreciate.

jamie129598
Posts: 10
Joined: Sun Oct 13, 2019 7:18 am
Has thanked: 0
Been thanked: 0

Re: New to the Ryker forum? Feel free to introduce yourself here!

#126 Post by jamie129598 » Sun Oct 13, 2019 6:49 pm

your welcome B R P website and the can am ryker website will also look up your bike by the V I N # for a possible recall

Rykerrider39
Posts: 39
Joined: Tue Sep 10, 2019 6:49 pm
Has thanked: 0
Been thanked: 10 times

Re: New to the Ryker forum? Feel free to introduce yourself here!

#127 Post by Rykerrider39 » Sun Oct 13, 2019 8:11 pm

I try the BRP ryker website with the VIN number and nothing comes up.

McRyker
Posts: 3
Joined: Fri Oct 18, 2019 9:36 am
Has thanked: 0
Been thanked: 0

Re: New to the Ryker forum? Feel free to introduce yourself here!

#128 Post by McRyker » Fri Oct 18, 2019 9:42 am

I've had my Ryker Rally since April, have just over 3000 miles on it. But I'm new to this forum, glad to find a forum just for US! I recently moved to Ruidoso Downs, NM from Bandera, TX and now call NM home. It is starting to cool off here now but until it snows, I'll be riding pretty much every day. I still have an FJR1300 in TX and will be relocating it in November.

PS, I'll post a photo of my custom Plasti Dip 'paint' job one of these days.

Rykerrider39
Posts: 39
Joined: Tue Sep 10, 2019 6:49 pm
Has thanked: 0
Been thanked: 10 times

Re: New to the Ryker forum? Feel free to introduce yourself here!

#129 Post by Rykerrider39 » Fri Oct 18, 2019 10:16 am

Welcome!

Stone Laker 19
Posts: 2
Joined: Tue Nov 05, 2019 2:11 pm
Has thanked: 0
Been thanked: 1 time

Re: New to the Ryker forum? Feel free to introduce yourself here!

#130 Post by Stone Laker 19 » Tue Nov 05, 2019 2:29 pm

Hi my name is Chuck and I live in northern Wisconsin. Riding season is over here. Its time to get new mods for the spring.
"Thumbs Up" from:
rykerforums

Post Reply